Carpenter/Guide

Carpenter is a type of profession.

The following page lists methodologies to calculate/approximate Carpenter EXP hourly rates.

Methods and Example Calculations

1) Use only the Circular Saw to mill logs.

This method only applies to Ash and Juniper logs as they can only be processed once with the Circular Saw to create planks and assumes that a player already banked the logs in the Lumber Bank.

This method takes approximately ~97 seconds to perform the below steps; it takes approximately 1 hour to mill ~445.3608 logs.

1. Withdraw 12 logs from the Lumber Bank
2. Run over and saw the 12 logs with the Circular Saw
3. Sell the planks/staves to the Timber Merchant Shop
4. Run back over to the Lumber Bank
5. Repeat

The multiplier 445.3608 can be used to approximate the hourly EXP rate of Ash and Juniper logs.

Lvl Req.	Raw Material	XP (Raw Material)	Approximate EXP per hour
0	Coarse Ash Log	56	24,940
8	Coarse Juniper Log	70	31,175
16	Rugged Ash Log	89	39,637
71	Average Ash Log

2) Use both of the Circular Saw and Wood Lathe to mill logs.

This method assumes that logs are already banked in the Lumber Bank This method takes approximately ~180 seconds to perform the below steps; it takes approximately 1 hour to mill ~240 logs.

1. Withdraw 12 logs from the Lumber Bank
2. Run over and saw the 12 logs with the Circular Saw
3. Run over and lathe the 24 poles with the Wood Lathe
4. Sell the Poles to the Timber Merchant Shop
5. Run back over to the Lumber Bank
6. Repeat

The multiplier 240 can be used to approximate the hourly EXP rate for carpentry.

Lvl Req.	Raw Material	EXP (Saw)	EXP (Lathe.)	Total EXP (1 Saw + 2 Lathe)	Approximate EXP per hour
2	Coarse Oak Log	59	30	119	28,560
4	Coarse Pine Log	63	32	127	30,480
6	Coarse Hickory Log	67	34	135	33,750
10	Coarse Poplar Log	75	38	151	37,750
12	Coarse Suave Log	79	40	159	38,160
14	Coarse Yew Log	84	42	168	40,320
18	Rugged Oak Log	94	47	188	45,120
22	Rugged Pine Log	109	55	219	52,560
30	Rugged Hickory Log	125	63	251	60,240

3) Purchase logs from the Gwen's Lumber shop use both of the Circular Saw and Wood Lathe to mill logs

This method involves purchasing logs from the shop at Gwen's Lumber.

This method takes approximately ~394 seconds to perform the below steps; it takes approximately 1 hour to mill ~219.2893 logs.

1. Purchase 24 logs from Gwen's Lumber
2. Bank 12 logs into the Lumber Bank
3. Saw the 12 logs with the Circular Saw
4. Lathe the 24 poles with the Wood Lathe
5. Sell the 24 lathed Poles to the Timber Merchant Shop
6. Withdraw 12 logs from the Lumber Bank
7. Saw the 12 logs with the Circular Saw
8. Lathe the 24 poles with the Wood Lathe
9. Sell the 24 lathed Poles to the Timber Merchant Shop
10. Repeat

The multiplier 219.2893 can be used to approximate the hourly EXP rate for carpentry.

Lvl Req.	Raw Material	EXP (Saw)	EXP (Lathe.)	Total EXP (1 Saw + 2 Lathe)	Approximate EXP per hour	Cost of Logs / H	Value of Poles / H	Cost / H
2	Coarse Oak Log	59	30	119	26,095	108  549	107  846	703
4	Coarse Pine Log	63	32	127	27,849	124  944	120  122	4  822
6	Coarse Hickory Log	67	34	135	29,604	135  246	130  205	5  41
10	Coarse Poplar Log	75	38	151	33,112	173  168	154  317	18  851
12	Coarse Suave Log	79	40	159	34,866	174  264	160  893	13  371
14	Coarse Yew Log	84	42	168	36,840	276  192	206  487	69  705
18	Rugged Oak Log	94	47	188	41,226	223  584	194  212	29  372
22	Rugged Pine Log	109	55	219	48,024	263  40	220  516	42  524
30	Rugged Hickory Log	125	63	251	55,041	302  496	254  711	47  785